Pug Mill For Paint Industry, Twin Shaft pugmill Mixer

Pug Mill For Paint Industry

pug mill for paint industry

Ideal for making putty, distemper and emulsion paint.
 
 
This Pug Mill have Ribbon type blade for mixing materials usually one of them dry and other a liquid.
 
 
when the material moves to & fro by the action / rotation of screw (Ribbon) blade. Both reverse & forward motions are effected to attain a smooth & pasty finish without solvent loss and raise in temperature.
 
 
The  Pug Mill consist  of a   'W'  shaped trough with two horizontal shafts on witch several  radial  arms  and  interrupted  ribbon type paddles are mounted. The paddle/ribbons areas are adjusted to ensure there are no ‘dead areas’ in  the Pug Mill. The dead areas in Pug Mill are avoided by making the clearance between the paddle /ribbon blade tips and trough shell is less than one half of the aggregate size.
 
 
 
Non  uniform  mixing  can  occur  if  Pug Mill  is  over filled,  the blade tips are immersed in material, the surface aggregates will tends to float above the blade & will not thoroughly mix. Conversely, Pug Mill containing too little aggregates, the tip of the blades rake through the material without mixing it.
 
 
Normally, the rating is based on percentage of the capacity of Pug Mills 'live zone' . The live zone is the net volume bellow a line extending across the top are of the inside body shell radius with shaft, blades and arms deducted.

 

Pug Mill For Paint Industry

pug mill for paint industry

Ideal for making putty, distemper and emulsion paint.
 
 
This Pug Mill have Ribbon type blade for mixing materials usually one of them dry and other a liquid.
 
 
when the material moves to & fro by the action / rotation of screw (Ribbon) blade. Both reverse & forward motions are effected to attain a smooth & pasty finish without solvent loss and raise in temperature.
 
 
The  Pug Mill consist  of a   'W'  shaped trough with two horizontal shafts on witch several  radial  arms  and  interrupted  ribbon type paddles are mounted. The paddle/ribbons areas are adjusted to ensure there are no ‘dead areas’ in  the Pug Mill. The dead areas in Pug Mill are avoided by making the clearance between the paddle /ribbon blade tips and trough shell is less than one half of the aggregate size.
 
 
 
Non  uniform  mixing  can  occur  if  Pug Mill  is  over filled,  the blade tips are immersed in material, the surface aggregates will tends to float above the blade & will not thoroughly mix. Conversely, Pug Mill containing too little aggregates, the tip of the blades rake through the material without mixing it.
 
 
Normally, the rating is based on percentage of the capacity of Pug Mills 'live zone' . The live zone is the net volume bellow a line extending across the top are of the inside body shell radius with shaft, blades and arms deducted.

 
 
 
  Products Range
  ETO Sterilizer
  ETO STERILIZER
  Horizontal Rectangle Autoclave
  Horizontal Cylindrical Autocalve
  Sliding Door ETO Sterilizer
  100% Pure ETO Gas Cartridge
  4.5 CFT CATH LAB ETO Sterilizer
  Ethylene Oxide Sterilizer
  Pharmaceutical Machienry
  Mass Mixer
  Autoclave
  Octagonal Blender
  Paste Kettle
  Mixing Vessel
  Syrup Manufacturing Plant
  Homoginizer / Emulsifier
  Membrane Filter Holder
  Paint Machinery
  Twin Shaft Disperser
  High Speed Disperser
  Ribbon Blender Mixer
  Sigma Mixer
  Ball Mill
  Pug Mill
  Bead Mill
  Chemical Machinery & Equipment
  Reaction Vessel
  Jacketed Reaction Vessel
  Condensor / Heat Exchanger
  Tray Dryer Machine
  Resin Plants
  Pilot Reaction Vessel
  Resin Plants
  Alkyd Resin Plants
  Polyester Resin Plant
  Tray Dryer Machine
  Resin Plants
  Pilot Reaction Vessel
   

Home  |  About Us  |  Products  |   Enquiry  |  Contact Us  |  Sitemap |  Links |  Link
© 2013 Ambica Boiler & Fabricator
ETO Sterilizer Manufacturer, Sigma Mixer Machine Manufacturer